News Center

Installation Steps of Fan Coil Unit Temperature Controller

Views : 2114
Author : Sherry
Update time : 2020-03-17 11:50:11
When decorating, installing the fan coil unit thermostat is also an important step, because the fan coil unit thermostat determines the temperature in the room and is also a link that we should pay attention to, so we will also pay attention to it, but at the same time, in order to make the living room beautiful, we will try every means to reduce the routing of the fan coil unit thermostat, and we can install the fan coil unit thermostat in a suitable position for people to use.  Therefore, friends who have no contact with the installation of fan coil thermostat can read the following articles.  It should be helpful to everyone.

Introduction of Fan Coil Temperature Controller:

Fan coil unit thermostat is suitable for temperature control in industrial, commercial and family rooms.  By comparing the indoor temperature with the set temperature, the fan coil unit and electric valve or electric air valve at the end of the central air conditioning system are controlled to achieve the purposes of adjusting the indoor temperature, improving the environmental comfort and saving energy.

Installation and operation steps of fan coil unit thermostat:

1. Insert a slotted screwdriver into the small card seat on the side of the fan coil unit thermostat, gently pry open the bottom plate (do not use excessive force or the shell card seat will be broken) to separate the fan coil thermostat panel from the bottom plate, then fix the bottom plate at the desired location with the screws provided, and then fasten the fan coil thermostat panel to the bottom plate.

2. The fan coil unit thermostat wiring must be correctly wired according to the electrical wiring diagram. Do not allow impurities such as water and mud to enter the fan coil unit thermostat, otherwise the device will be damaged.

3. Fan coil unit temperature controller shall be installed on the wall surface with free flow of ambient air, 1.2m high from the ground, and it is a place with stable temperature and not close to the entrance or air conditioning device. The installation position shall ensure that it is not affected by other heat sources and sunlight, airflow of doors and windows or temperature of external wall.
Related News
Read More >>
Water source rooftop chiller unit part in HAVC Water source rooftop chiller unit part in HAVC
Mar .22.2024
The fan coil unit is a common HVAC system terminal device. It can be used independently or in conjunction with other equipment to provide more efficient cooling and heating services. One such example is the water-source chiller.
The quietness and efficiency of Guqin series Horizontal Ultra-Thin Concealed fan coil units The quietness and efficiency of Guqin series Horizontal Ultra-Thin Concealed fan coil units
Mar .22.2024
The Guqin Series Vertical and Horizontal Ultra-Thin Concealed Fan Coil Unit is a HVAC terminal component product produced by Yesncer, named after the world’s intangible cultural heritage – the Guqin. Not only does it have an exquisite appearance, but its
Ultra-low temperature air source heat pump principle and core technology Ultra-low temperature air source heat pump principle and core technology
Dec .27.2023
The principle of ultra-low temperature heat pump system is as follows.
Fan Coil Unit Selection And Product Advantages Fan Coil Unit Selection And Product Advantages
Dec .07.2023
Fan Coil Unit Selection And Product Advantages
This website uses cookies
We use essential cookies to make our site work. With your consent,we may also use non-essential cookies to improve user experience and analyze website traffic. By clicking "Yes",you agree to our website's cookies use as described in our "Privacy Statement".